Mivue 6 series Advanced Driver Assistance Systems (ADAS)

Mivue 6 series Advanced Driver Assistance Systems (ADAS)

MiVue Advanced Driver Assistance Systems (ADAS)

ADAS is a new feature on our MiVue 618, 688 and 698 Dual devices, which includes the Lane Departure Warning System (LDWS) and Front Collision Warning System (FCWS). LDWS and FCWS have been designed to assist with driver, car and road safety by alerting the driver to potential problems.
The following devices come with LDWS pre-installed and FCWS is activated with latest firmware update:
MiVue 618 (latest Firmware 
VM00.03.6E.BE1OS) 
MiVue 688 (latest Firmware VS00.03.6F.BE1OS)
MiVue 698 Dual (latest Firmware VM00.03.6E.BE1OD)

Please note: The Advanced Driver Assistance Systems aren't available for MiVue 608 / 638 / 658 devices. 

Calibration

For the LDWS and FCWS functions to operate correctly the device first needs to be calibrated to the current road conditions. 
Important: If the device is not calibrated you might receive alerts at the wrong time or not at all.

For accurate calibration you will need to drive on a straight part of the road, select Menu > Driving Safety > Calibration and follow the on screen prompts. 

Never try to operate the device yourself while driving, please ask a passenger to complete the steps for you.


LDWS (Lane Departure Warning System)
LDWS is designed to warn you when the car begins to move/veer out of its lane in an attempt to minimize accidents. With LDSW enabled, the device will alert you when it detects that your speed is over 60 km/h (40 mph) and the car has strayed from its intended lane.

On the device the following screen will pop up and at the same time you either receive a beep or a voice alert. To change your 
Lane Departure Warning System alert settings select Menu > Driving Safety > LDWS.



Note:
 LDWS will work best on straight roads like motorways and A-roads, and performance may be limited on bends and windy roads. Changing lanes can also trigger the LDWS alerts.

FCWS (Front Collision Warning System)

FCWS was developed to warn you if a possible collision with a vehicle ahead is detected. Driving at 60 km/h (40 mph) you will be alerted if the distance from the vehicle ahead is less than 1.5 sec or less than 15 metres. 

Note: The FCWS will only operate in normal daylight conditions not lower than the light conditions on a cloudy day (higher than 200 lux).



    • Related Articles

    • MiVue J- series Driving Safety

      MiVue Driving Safety with ADAS ADAS includes the Lane Departure Warning System (LDWS) and Front Collision Warning System (FCWS). LDWS and FCWS have been designed to assist with driver, car and road safety by alerting the driver to potential problems. ...
    • MioMore Desktop and MiVue Manager compatibility for MiVue Drive series

      MioMore Desktop compatibility for MiVue Drive series MioMore Desktop supports the following operating systems: Windows 7 32bit/64bit Windows 8 / 10 Note: MioMore Desktop is not compatible with Mac. MiVue Manager compatibility for MiVue Drive series ...
    • Mivue 6 series G-sensor

      What is a G-sensor? Our MiVue 6 series devices all come with a built in G-sensor which will measure the movement of your vehicle through 3 axis: forwards and backwards, up and down, left and right. The drive recorder uses the G-sensors to detect ...
    • MiVue Driving Safety

      MiVue Driving Safety with ADAS ADAS includes the Lane Departure Warning System (LDWS) and Front Collision Warning System (FCWS). LDWS and FCWS have been designed to assist with driver, car and road safety by alerting the driver to potential problems. ...
    • Setting the date and time on a MiVue M5xx-series

      Setting the date and time To ensure the accuracy of recorded date and time, make sure you set both before recording. Make sure the MicroSD card is inserted. Remove the protective cap. Connect your device to the PC and turn it on. The MiVue ...