MiVue J- series Driving Safety

MiVue J- series Driving Safety

MiVue Driving Safety with ADAS

ADAS includes the Lane Departure Warning System (LDWS) and Front Collision Warning System (FCWS). LDWS and FCWS have been designed to assist with driver, car and road safety by alerting the driver to potential problems. 

MiVue Pro App (iOS 9.0 and above / Android 5.0 and above)
To change settings on J-series devices, the MiVue Pro app needs to be installed on your smartphone first. Search for "Mivue Pro" inthe App store or on the Play Store.
For more information on how to successfully connect you smartphone and J-series device via MiVue Pro, click HERE. 

Calibration

For the LDWS and FCWS functions to operate correctly the device first needs to be calibrated to the current road conditions regularly. 
Important: If the device is not calibrated you might receive alerts at the wrong time or not at all.

  1. For accurate calibration you will need to drive on a straight part of the road in the middle of the lane
  2. Ask a passenger to open the MiVue Pro app and connect to your J60/J85 Wifi.
  3. On the app > select Settings > under Driving Safety select Calibration and follow the on screen prompts.


Important: Never try to operate the device yourself while driving, please ask a passenger to complete the steps for you!


 LDWS (Lane Departure Warning System)

LDWS is designed to warn you when the car begins to move/veer out of its lane in an attempt to minimize accidents. With LDSW enabled, the device will alert you  with voice alerts when it detects that your speed is over 60 km/h (40 mph) and the car has strayed from its intended lane. 

Note: LDWS will work best on straight roads like motorways and A-roads, and performance may be limited on bends and windy roads. Changing lanes can also trigger the LDWS alerts.

 FCWS (Front Collision Warning System)

FCWS was developed to warn you if a possible collision with a vehicle ahead is detected. Driving at 60 km/h (40 mph) you will be alerted if the distance from the vehicle ahead is less than 1.5 sec or less than 15 metres. 

Note: The FCWS will only operate in normal daylight conditions not lower than the light conditions on a cloudy day (higher than 200 lux).

 Headlight Reminder

When turned on, this feature will remind you to turn the lights on, when driving after dark. By default it is set to OFF.

 Driver Fatigue Alert

When turned on, the system will remind you, to take a break during a long- distance drive. (after, 2h / 3h / or 4h). By default it is set to OFF.

 Eco Drive indicator

When turned on, the Eco drive indicator will be displayed on the recording screen next to the speed. The colour of the indicator will change between red, yellow and green, reminding you to drive more efficiently. By default it is set to OFF.

 Stop and Go

When turned on, you will be alerted when the car ahead, has proceeded to go after stopping for more than 10 sec. By default it is set to OFF.

    • Related Articles

    • MiVue Driving Safety

      MiVue Driving Safety with ADAS ADAS includes the Lane Departure Warning System (LDWS) and Front Collision Warning System (FCWS). LDWS and FCWS have been designed to assist with driver, car and road safety by alerting the driver to potential problems. ...

    • Connecting the MiVue Pro app to a J-series device

      MiVue Pro App The MiVue Pro App acts as a remote control to your MiVue Jxx device, it helps you to change the settings, receive updates and download / backup all the recordings to your smartphone. The App can be found on the App Store and on Google ...

    • MiVue 6 Series safety camera data in KM and not MPH - Resolved 24th August

      Incorrect safety camera values Once installing the latest safety camera update on the MiVue 6 Series, the information is incorrectly displayed in KM and not MPH even though the unit is set to imperial. This issue has been resolved in our latest ...

    • J- series MiVue Pro App Troubleshooting

      + Problems re-connecting to Mivue after it was disconnected. You may occasionally encounter problems connecting to your MiVue after it had been disconnected. Solution for Android: Open the WiFi settings on your phone > tap and hold MiVue_xx:xx > ...

    • Over-the-Air Voice Language Update for the J-series

      J- series OTA (over-the-air) language update This includes the following languages: English (UK) Polish Russian Romanian Slovakian Czech HungarianNote: Before you start please ensure you have the latest MiVue Pro app downloaded and installed on your ...