Saving a NeverMiss location under recording mode
During recording mode, the Cyclo map view will show an additional Pin button for you to mark a place. You can see the marked place after you upload the recorded track in the MioShare History page. You can use the re-edit button to save the marked place to your Place Manager to re-track again for your next NeverMiss tour.
Please be notified that the place won't be saved in the device's POI list directly.
Related Articles
Different parking mode on MiVue 8 series
[ Smart Mode ] Supports recordings that are triggered by the G sensor and motion detection. For this mode, it will start recording 5 seconds before being triggered. Need more power to keep the DVR on. [ Passive Powered Parking Mode ] Supports ...
MiVue C540 / C541 / C570 recording modes
MiVue C540 / C541 / C570 recording modes Continuous recording When connected to the in car charger and the engine is turned on, the device will automatically switch on and by default, will start continuous recording after a few seconds. The ...
Saving / Capturing a location to device Favorite by tapping on the map
Save a location You can save a location or capture your current location by tapping on the map. From the main menu tap Navigate > Point on map select the point you want to save and tap GO. The coordinates of the location you have selected will ...
NeverMiss feature
Regular .gpx track file can only offer turn-by-turn in your Cyclo device. If the .gpx track file contains NeverMiss data, it shows prompt notification during your journey. It will show a QR-code for you to check the web page for more information as ...
Recording and System Error on MiVue M510/M560
Recording To start recording, press and hold the power button to turn the device on. Now press the power button again to start recording. When recording, the red LED light will start blinking. Press and hold down the power button again to stop ...