Software issues & errors on Cyclo
Reformatting your device
Before you begin: please ensure you have installed CycloAgent and have connected, synced and registered your device.
If you encounter problems with your Cyclo, please reformat the device. Make sure you only reformat the Mio_System drive and not the Mio_Data drive. Please switch your device OFF, connect it to the PC and then switch the device back on.
Open Windows Explorer (or My Computer > Computer) and right click the Mio_System drive. Select Format and leave the default option set to FAT32. Tick the box for Quick Format and click Start.
When this is finished, disconnect the device for around 10-15 seconds. At this point you should continue to see the USB connection screen on the device. Now reconnect the device to the PC and start the CycloAgent application.
CycloAgent will detect that the Mio_System drive is empty. You will see the message Recover your device, select Recover and CycloAgent will download and install the latest software and maps to your device. Please be aware that this process can take some time.
When the device has been fully recovered, you will see the message that the recovery was successful. Your device is now ready to use as normal.
Related Articles
Software issues & errors on Cyclo Discover & Cyclo Discover Plus
Reformatting your device Before you begin: please ensure you have installed CycloAgent and have connected, synced and registered your device. If you encounter problems with your Cyclo, please reformat the device. Make sure you only reformat the ...
Troubleshooting GPS Issues on your Cyclo
Troubleshooting GPS Issues If you are experiencing issues such as: Receiving a message on your Cyclo ''Unable to calculate the route because maximum distance of 200km reached''. Your saved or uploaded recording has an incorrect time/date. When ...
Using IGN maps with Cyclo version 4.2 software
Update your IGN maps If you have previously purchased and installed the French IGN maps, you will need to update these so that they can be used with our new software v4.2. Please follow the instructions below to upgrade your Cyclo device to software ...
Shimano Di2 & Cyclo
Shimano Di2 Please note: Shimano Di2 is only supported on devices running v4 software. For a Di2 unit to work with your Cyclo, you need to have the Shimano SM-EWW01 Wireless unit installed on your bike along with the Di2. You will also need to ensure ...
Map Update of Cyclo Series
With the development of new technology, hardware specifications of Cyclo series products cannot meet the requirement of the latest map technologies also with software programs, and there may be a gap in compatibility performance. It has been ...